Overhaul Engine Rebuild Kit Fit 08-12 Subaru Forester Impreza 2.5L Turbo EJ255

  
Pistons, Rings, Rods & Parts. Overhaul Engine Rebuild Kit Fit 08-12 Subaru Forester Impreza 2.5L Turbo EJ255. Guaranteed to fit and meet the specifications of the OE parts being replaced. Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards.

Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Remark: Does not fit 07-12 SUBARU IMPREZA WRX STI 2.5L EJ257.

For the main and rod bearings of the Subaru engines, 2 variations existed. For the main bearings, the thrust washer is either located at the #3 position (middle) or the #5 position (bottom). For the rod bearings, the shaft/journal size is either 48mm or 52mm. This listing offers main bearing set with the thrust washers at #5 position and rod bearing set with 52mm journal size. Please check with your professional installer if you are unsure on which set your engine takes. 24/7 Support Ask product experts. Part Numbers: FS9014 (use HS9014, CS9008), HB9008, SL1000, PS9013, MB8309, RB8296, TBK328B-GMB, WP9012, OP9002. Please Note: Image is used for display purposes only and may not reflect actual product. Designed using state-of-the-art technology and with customers in mind. This product is made of high-quality materials to serve you for years to come.

It will meet your needs and deliver great quality at an affordable cost. Replace Part #: HS26531PT, HS26531PT-1, CS26170, ES72905, 12006AD210, 12006AD810, 13028-AA240, 13073-AA080, 13085-AA061, 13073-AA230, 13033-AA042, 21111-AA250. Full Gasket Set Multiple Layers Steel (MLS) Head Gasket, Valve Cover Gasket, Valve Stem Seals, Intake Manifold Gasket... Other Small Gaskets, RTV Silicone.

4 Pistons with Complete Ring Set (sizes available: see options above). Standard Bore Diameter: 99.50mm.

King Main Bearing Set - Thrust washers at #5 position (sizes available: see options above). King Rod Bearing Set - 52mm journal (sizes available: see options above). 1 Timing Belt (281 teeth). 1 Tensioner (bearing & hydraulic cylindrical integral). 1 Lower Idler (bearing with inner flange).

1 Upper Idler small bearing. 1 Lower Idler (sprocket with bearing). Water Pump w/ Gasket (2 outlet pipes). From Bottom of the Skirt. Bore diameter is measured before skirt Surface Treatment.

To Determine "Bore" to Diameter, add wall clearance of +0.04mm (0.00157) to maximum Bore Size. No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engines & Engine Parts\Engine Rebuild Kits". The seller is "mizumoauto" and is located in this country: US.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

1. Pistons with Rings Size: Standard
2. Main and Rod Bearings Size: Standard
3. Note: Water pump with 2 Outlet Pipes
4. Remark: Thrust washers at #5 position, rod bearings 52mm journal
5. Piston Surface Treatment: Anodized Head & Moly Skirt
6. Material: Multiple Layers Steel (MLS) Head Gasket
7. Measurement: Standard Bore Diameter 99.50mm; Height 1.20mm x 1.20mm x 2.00mm
8. Interchange Part Number: HS26531PT, HS26531PT-1, CS26170, ES72905, 12006AD210, 12006AD810, 13028-AA240, 13073-AA080, 13085-AA061, 13073-AA230, 13033-AA042, 21111-AA250
9. Type: Engine Rebuilding Kit
10. Wrist Pin Lock: Cir Clip
11. Piston Pin Retaining Method: Full Floating
12. OE Spec or Performance/Custom: OE Spec
13. Number of Cylinders: 4
14. Manufacturer Part Number: MA-9761247675
15. Brand: Aftermarket Products
16. Fitment Type: Direct Replacement
17. Warranty: Yes