Engine Rebuild Kit - Honda CB/CL360 - With Rings. Engine rebuild kit for the Honda CB360 and CL360. Comes with an engine gasket set and oil seals. If you're diving in and doing the top end, honing the cylinders, replacing engine side cover gaskets and replacing some seals this is a great kit to have on hand! The piston rings are for the stock bore.Ductile Iron Casting (FCD) is superior to OEM rings which were sometimes made from steel. Superior tensile strength, ductility and elongation compared to steel rings. FCD is even stronger than regular cast iron. FCD is used in many automotive parts, which require strength and durability. Be very careful when installing the cylinder over new rings, it's helpful to have the proper tool to keep the rings compressed as you lower the cylinder over the pistons. Try to use only plastic tipped tools to prevent from scratching aluminum surfaces. The Letter stamped on the top two rings should be facing up when installing them and stagger the ring gaps according to the manual. Press your seals in straight with a seal driver or a socket with a slightly smaller OD than the seal. Both surfaces must be free of dirt to create an oil tight seal.
All sealing surfaces for gaskets must be clean and flat to make a proper seal, sometimes non-hardening sealant is necessary. Top Compression Ring (silver outer rim).Second Ring (black outer rim). Bottom Ring oil spacer (tall ring). The item "Engine Rebuild Kit Honda CB360 CL360 Gasket Set + Seals + Piston Rings" is in sale since Tuesday, June 13, 2017. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Gaskets & Seals". The seller is "4into1motorcycleparts" and is located in South San Francisco, California.
This item can be shipped worldwide.