14592-286-310 - Tensioner Holder Gasket x1. 91302-001-020 - O-ring 30.8 Qty: 4.
91304-287-000 - O-ring 69.8 x 2 Qty: 2. 16229-286-000 - Carburetor Insulator Gasket x2. 12191-312-000 - Cylinder Base Gasket x1.
18291-286-030 - Exhaust Pipe Gasket x2. 11394-286-000 - Dynamo Cover Gasket x1. 11395-286-040 - Left Crankcase Cover Gasket x1. 11394-286-040 - Right Crankcase Cover Gasket x1. Left Cylinder Head Cover Seal.
Countershaft Seal - goes behind front sprocket. Dust Seal - Fits over the clutch lifter under the left crankcase cover. Ductile Iron Casting (FCD) is superior to OEM rings which were sometimes made from steel. Superior tensile strength, ductility and elongation compared to steel rings.FCD is even stronger than regular cast iron. FCD is used in many automotive parts, which require strength and durability. Be very careful when installing the cylinder over new rings, it's helpful to have the proper tool to keep the rings compressed as you lower the cylinder over the pistons. Try to use only plastic tipped tools to prevent from scratching aluminum surfaces. The Letter stamped on the top two rings should be facing up when installing them and stagger the ring gaps according to the manual. Press your seals in straight with a seal driver or a socket with a slightly smaller OD than the seal. Both surfaces must be free of dirt to create an oil tight seal. All sealing surfaces for gaskets must be clean and flat to make a proper seal, sometimes non-hardening sealant is necessary. Top Compression Ring (silver outer rim). Second Ring (black outer rim). Bottom Rings (3 pieces - Spacer in the middle - 1 thin ring on either side). The item "Engine Rebuild Kit Honda CB350 CL350 SL350 Gasket Set + Seals + Piston Rings" is in sale since Tuesday, June 13, 2017.
This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Gaskets & Seals". The seller is "4into1motorcycleparts" and is located in South San Francisco, California.
This item can be shipped worldwide.