Engine Rebuild Kit Fit 99-03 Subaru Impreza Forester Outback 2.5L SOHC VIN G

  

Pistons, Rings, Rods & Parts. Engine Rebuild Kit Fit 99-03 Subaru Impreza Forester Outback 2.5L SOHC VIN G. Guaranteed to fit and meet the specifications of the OE parts being replaced.

Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards. Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Remark: For the main and rod bearings of the Subaru engines, 2 variations existed.

For the main bearings, the thrust washer is either located at the #3 position (middle) or the #5 position (bottom). For the rod bearings, the shaft/journal size is either 48mm or 52mm. This listing offers main bearing set with the thrust washers at #5 position and rod bearing set with 52mm journal size. Please check with your professional installer if you are unsure on which set your engine takes. 24/7 Support Ask product experts. Part Numbers: FS9009G (use HS9009G, CS9008), SL1000, PS9009, MB8309, RB8296, TBK304-GMB, WP9008, OP9002. Designed using state-of-the-art technology and with customers in mind. This product is made of high-quality materials to serve you for years to come.

It will meet your needs and deliver great quality at an affordable cost. Replace Part #: 12006AB470, 12006AC070. Full Gasket Set Graphite Head Gasket, Valve Cover Gasket, Valve Stem Seals, Intake Manifold Gasket... Other Small Gaskets, RTV Silicone.

4 Pistons with Complete Ring Set (STD - Standard Size, or Oversized 0.50mm = 0.020). Standard Bore Diameter: 99.50mm.

King Main Bearing Set - Thrust washers at #5 position (STD - Standard Size, or Undersize 0.25mm = 0.010", 0.50mm = 0.020"). King Rod Bearing Set - 52mm journal (STD - Standard Size, or Undersize 0.25mm = 0.010", 0.50mm = 0.020"). 1 Timing Belt (223 teeth).

1 GMB Tensioner assembly (tensioner bearing & hydraulic cylinder combo). 1 GMB Lower Idler (sprocket with bearing). 2 GMB Upper Idlers (left & right). From Bottom of the Skirt.

Bore diameter is measured before skirt Surface Treatment. To Determine "Bore" to Diameter, add wall clearance of +0.04mm (0.00157) to maximum Bore Size.

No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products. The item "Engine Rebuild Kit Fit 99-03 Subaru Impreza Forester Outback 2.5L SOHC VIN G" is in sale since Monday, October 15, 2012. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Engine Rebuilding Kits".

The seller is "mizumoauto" and is located in South El Monte, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Cayman islands, Sri lanka, Macao, Martinique, Nicaragua, Oman, Peru, Paraguay, Viet nam, Uruguay.

1. Brand: Aftermarket Products
2. Manufacturer Part Number: MA-4216983366
3. Warranty: Yes
4. Interchange Part Number: HS26170PT-1
5. Note: Thrust washers at #5 position, rod bearings 52mm journal
6. Piston Surface Treatment: Moly Skirt
7. Material: Graphite Head Gasket
8. Bearing Sizes: STD - Standard Size, or Undersize 0.25mm, 0.50mm
9. Piston Sizes: STD - Standard Size, or Oversize 0.50mm
10. Measurement: Standard Bore Diameter 99.50mm; Height 1.20mm x 1.20mm x 2.50mm
11. Fitment Type: Direct Replacement
12. Type: Engine Rebuilding Kit
13. Wrist Pin Lock: Cir Clip
14. Piston Pin Retaining Method: Full Floating
15. OE Spec or Performance/Custom: OE Spec
16. Number of Cylinders: 4